FloJet Waste Pump
Self-priming flexible impeller features stainless steel wear plate and cutter that reduces particle size to 1/8". Exclusive Run-Dry Protection Device automatically shuts off the pump after approximately 20 seconds of run-dry operation, protecting pump from serious damage. 1-1/2" hose barb inlet and 1-1/2" N.P.T. (male) outlet.
Features:
Can Empty A 30 Gallon Holding Tank In 3 Minutes
Grinds Waste Into Small Particles For Easy Disposal
Pump Can Be Permanently Installed For Easy Holding Tank Evacuation Into A Toilet Or Plumbing Clean Out Access
Limited 90 Day Warranty
Neat and clean way to quickly evacuate waste tanks
Empty black-water and greywater Holding Tanks at home
Grinds waste as it pumps
Built-in Impeller Protection Device...longer life!
Flow of up to 13 GPM for fast, clean Holding Tank evacuation
Empty holding tanks and avoid dump stations
Transfer waste from recirculating toilets to main holding tank
Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.
Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Specs:
Compatibility: Sanitation Waste Dump System
Ampere Rating: 16 Ampere
Voltage Rating: 12 Volts DC
Flow Rate (GPM): 13 Gallon Per Minute
Inlet Size: 3 Inch
Inlet Attachment Type: RV-Type Slip-On Hose
Outlet Attachment Type: Hose Barb
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb