Pumps smoothly from 1.0 to 3.2 GPM. Use with 1 to 5 outlets. Shuts off at 35 psi. Runs dry. The built-in bypass valve eliminates the need for an accumulator tank. 12V motors with built-in thermal protection, 2 x 1/2" pipe, and 2 x 1/2" barb ports. Does not include strainers. 3.9"H x 6.3"L x 8.3"H. 2 Year Warranty, Made in the USA. Soft rubber mounts reduce noise. Delivers 1 to 3.2 gallons per minute at up to 35 PSI. Self-priming to 10-foot suction lift. Can run dry for extended periods. Prevents backflow and damage from high city water pressure. Sealed bearings in motor and drive minimize corrosion. Redesigned pressure switch for more consistent shut-off pressure. Automatically shuts off if the motor overheats. Four-chamber design with quad diaphragm and built-in bypass cut down on water pulses for smooth flow with less vibration.
Features of the 4406 Series Pumps include:
A Bypass valve that greatly reduces pulsating water and pressure switch chatter
Smooth flow from 1 GPM to over 3.2 GPM (3.8 to over 12.1l/min.)
Eliminates the need for an accumulator tank
Designed for up to 5 fixtures
Runs dry without harm to the pump
Easy to install, service, and winterize
Install a FLOJET water strainer to protect the pump from debris (not included)
115v ac park model available.
IAPMO & CSA listed
Dimensions are 3 7/8"H x 6 1/4"W x 8 1/4"L.
*Use product 86-8336 as a universal replacement pump and on Dutchmen trailers.
Includes plug-in ports for easy installation. Included with the pump are two - 1/2" pipe and two - 1/2" barb ports to make installation simple. The pump does not include strainers.
Also available:
*868337 - Quad II Water Pump, 3.3 GPM, 115V